+86 186 5870 1568 hi@jeitco.com Response within 10 min.

NEWS

Check category

General Information About The 3-PC Tinplate Can

/

General information about The 3-PC tinplate can

 

The tin coating is applied by continuous electro-deposition of tin on to thin steel strip, after which the tinplate is either sold in coil form or cut into sheets for the can manufacturer.

 

At the can manufacturers, the tinplate is slit into rectangular “body blanks” which are then rolled into a cylindrical shape and the contacting edges welded together at very high speeds. The ends of this cylinder are flanged, ready to receive the can ends.

 

Corrugations known as “beads” are often rolled into the cylinder walls for added strength.

 

The can end is applied forming the “open top can” which is then supplied to the food canning company.

Contact
Jiujiang Yongxin Can Equipment Co., Ltd
Jiujiang Elevating Industry & Trade Co., Ltd

 

Address:

Antai Road #05, Automobile Industrial Zone,

Economic Development District,

332000 Jiujiang China

这是描述信息

Mobile: +0086 186 5870 1568

E-Mail: hi@jeitco.com

Global Site: www.jeitco.com

© JIUJIANG YONGXIN CAN EQUIPMENT CO., LTD 2017 SITEMAP