+86 186 5870 1568 hi@jeitco.com Response within 10 min.

Machines

All categories
Number of views:
1003

Fully Automatic Sheet Servo Zig-Zag Feeder for High-performance C-Frame Press (Deep Throat)

Retail price
0.0
Market price
0.0
Number of views:
1003
Product serial number
Category
Feed-in
Quantity
-
+
Stock:
Model:
Operation:
Automatic
Application:
Zig-Zag Sheet Feeding
Can size:
Tailor-made Dependent
Speed:
Tailor-made Dependent
1
Feature
Parameters
Technical Parameter
PDF Download
YouTube Video

Fully Automatic Sheet Servo Zig-Zag Feeder for High-performance C-Frame Press (Deep Throat)

Feeding Sys.
Descriptions

Semi-Automatic
Feeding Sys.

Automatic
Four-Idle Stroke Feeding Sys.

Press Type

C-Frame Press
(Deep Throat Press)

Diameter Range

Used for different kinds of round/square/irregular ends and 2PC DRD canbody

Stroke (SPM)

60-120 SPM

60-130 SPM

Output Capacity (EPM)

50-110 EPM

55-220 EPM

Press with Sheet feeder line (CNC production line) is for the purpose of cap-making and body-forming. It is comprised of CNC Feeding System, Auto Punch, Auto Feeder, Stock table, Belt Conveyer. (options: Curler, Second Former, Edge-cutter, Scrap Collector etc.)

 

The process:

 

1.Put tailored plate on the movable table of the Feeder and fix. Then start the lifting system to lift the plate to the place where Vacuum sucker can reach.

2.Vacuum sucker: griping the plate and brings it to the Stock table.

       3.Numerical control platform ( The program of which has already been preset and tested) starts up and grip the plate to run in preset route, the pressing machine is moving coordinately with numerical control platform which to make the work piece forming, and then the belt conveyer brings the work piece to the following processes. After one piece of plate is finished, the gripper would loosen automatically, the scrap slides onto the ground or is collected by Scrap Collector.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

working principle

1.Put the customized tinplate sheets into the CNC table of feeder and make it positioned. Start the lifter to send the sheets to the place on which the sheet can be sucked by the vacuum sucker.

2.Sheets will be sucked and sent to the CNC table by vacuum sucker.

3.Start the CNC table, sheets will be clamped and running as the pre-set route. With the movements of pressure machine and CNC table, the sheets will be punched in shape, and blew to the conveyor one by one to finish the downstream processes.

4.The clamp shall release automatically after punching each piece of sheet and the scrap will be collected by the scrap-collector.

 

Feeding Sys.
Descriptions

Semi-Automatic
Feeding Sys.

Automatic
Four-Idle Stroke Feeding Sys.

Press Type

C-Frame Press
(Deep Throat Press)

Diameter Range

Used for different kinds of round/square/irregular ends and 2PC DRD canbody

Stroke (SPM)

60-120 SPM

60-130 SPM

Output Capacity (EPM)

50-110 EPM

55-220 EPM

留言应用名称:
Customer message
描述:
验证码

Contact
Jiujiang Yongxin Can Equipment Co., Ltd
Jiujiang Elevating Industry & Trade Co., Ltd

 

Address:

Antai Road #05, Automobile Industrial Zone,

Economic Development District,

332000 Jiujiang China

这是描述信息

Mobile: +0086 186 5870 1568

E-Mail: hi@jeitco.com

Global Site: www.jeitco.com

© JIUJIANG YONGXIN CAN EQUIPMENT CO., LTD 2017 SITEMAP