Machines



Fully Automatic Sheet Servo Zig-Zag Feeder for High-performance C-Frame Press (Deep Throat)
Feeding Sys.
|
Semi-Automatic
|
Automatic
|
Press Type |
C-Frame Press
|
|
Diameter Range |
Used for different kinds of round/square/irregular ends and 2PC DRD canbody |
|
Stroke (SPM) |
60-120 SPM |
60-130 SPM |
Output Capacity (EPM) |
50-110 EPM |
55-220 EPM |
Press with Sheet feeder line (CNC production line) is for the purpose of cap-making and body-forming. It is comprised of CNC Feeding System, Auto Punch, Auto Feeder, Stock table, Belt Conveyer. (options: Curler, Second Former, Edge-cutter, Scrap Collector etc.)
The process:
1.Put tailored plate on the movable table of the Feeder and fix. Then start the lifting system to lift the plate to the place where Vacuum sucker can reach.
2.Vacuum sucker: griping the plate and brings it to the Stock table.
3.Numerical control platform ( The program of which has already been preset and tested) starts up and grip the plate to run in preset route, the pressing machine is moving coordinately with numerical control platform which to make the work piece forming, and then the belt conveyer brings the work piece to the following processes. After one piece of plate is finished, the gripper would loosen automatically, the scrap slides onto the ground or is collected by Scrap Collector.
working principle
1.Put the customized tinplate sheets into the CNC table of feeder and make it positioned. Start the lifter to send the sheets to the place on which the sheet can be sucked by the vacuum sucker.
2.Sheets will be sucked and sent to the CNC table by vacuum sucker.
3.Start the CNC table, sheets will be clamped and running as the pre-set route. With the movements of pressure machine and CNC table, the sheets will be punched in shape, and blew to the conveyor one by one to finish the downstream processes.
4.The clamp shall release automatically after punching each piece of sheet and the scrap will be collected by the scrap-collector.
Feeding Sys.
|
Semi-Automatic
|
Automatic
|
Press Type |
C-Frame Press
|
|
Diameter Range |
Used for different kinds of round/square/irregular ends and 2PC DRD canbody |
|
Stroke (SPM) |
60-120 SPM |
60-130 SPM |
Output Capacity (EPM) |
50-110 EPM |
55-220 EPM |
working principle
1.Put the customized tinplate sheets into the CNC table of feeder and make it positioned. Start the lifter to send the sheets to the place on which the sheet can be sucked by the vacuum sucker.
2.Sheets will be sucked and sent to the CNC table by vacuum sucker.
3.Start the CNC table, sheets will be clamped and running as the pre-set route. With the movements of pressure machine and CNC table, the sheets will be punched in shape, and blew to the conveyor one by one to finish the downstream processes.
4.The clamp shall release automatically after punching each piece of sheet and the scrap will be collected by the scrap-collector.
Feeding Sys.
|
Semi-Automatic
|
Automatic
|
Press Type |
C-Frame Press
|
|
Diameter Range |
Used for different kinds of round/square/irregular ends and 2PC DRD canbody |
|
Stroke (SPM) |
60-120 SPM |
60-130 SPM |
Output Capacity (EPM) |
50-110 EPM |
55-220 EPM |
working principle
1.Put the customized tinplate sheets into the CNC table of feeder and make it positioned. Start the lifter to send the sheets to the place on which the sheet can be sucked by the vacuum sucker.
2.Sheets will be sucked and sent to the CNC table by vacuum sucker.
3.Start the CNC table, sheets will be clamped and running as the pre-set route. With the movements of pressure machine and CNC table, the sheets will be punched in shape, and blew to the conveyor one by one to finish the downstream processes.
4.The clamp shall release automatically after punching each piece of sheet and the scrap will be collected by the scrap-collector.
Feeding Sys.
|
Semi-Automatic
|
Automatic
|
Press Type |
C-Frame Press
|
|
Diameter Range |
Used for different kinds of round/square/irregular ends and 2PC DRD canbody |
|
Stroke (SPM) |
60-120 SPM |
60-130 SPM |
Output Capacity (EPM) |
50-110 EPM |
55-220 EPM |
working principle
1.Put the customized tinplate sheets into the CNC table of feeder and make it positioned. Start the lifter to send the sheets to the place on which the sheet can be sucked by the vacuum sucker.
2.Sheets will be sucked and sent to the CNC table by vacuum sucker.
3.Start the CNC table, sheets will be clamped and running as the pre-set route. With the movements of pressure machine and CNC table, the sheets will be punched in shape, and blew to the conveyor one by one to finish the downstream processes.
4.The clamp shall release automatically after punching each piece of sheet and the scrap will be collected by the scrap-collector.
Feeding Sys.
|
Semi-Automatic
|
Automatic
|
Press Type |
C-Frame Press
|
|
Diameter Range |
Used for different kinds of round/square/irregular ends and 2PC DRD canbody |
|
Stroke (SPM) |
60-120 SPM |
60-130 SPM |
Output Capacity (EPM) |
50-110 EPM |
55-220 EPM |
working principle
1.Put the customized tinplate sheets into the CNC table of feeder and make it positioned. Start the lifter to send the sheets to the place on which the sheet can be sucked by the vacuum sucker.
2.Sheets will be sucked and sent to the CNC table by vacuum sucker.
3.Start the CNC table, sheets will be clamped and running as the pre-set route. With the movements of pressure machine and CNC table, the sheets will be punched in shape, and blew to the conveyor one by one to finish the downstream processes.
4.The clamp shall release automatically after punching each piece of sheet and the scrap will be collected by the scrap-collector.
Feeding Sys.
|
Semi-Automatic
|
Automatic
|
Press Type |
C-Frame Press
|
|
Diameter Range |
Used for different kinds of round/square/irregular ends and 2PC DRD canbody |
|
Stroke (SPM) |
60-120 SPM |
60-130 SPM |
Output Capacity (EPM) |
50-110 EPM |
55-220 EPM |
Related Products